🌈 Can be applied to a painted satyr with an Uncommon Trait Potion.

Trait: Uncommon satyr horns.
Size: Uncommon horns can be up to 1.5x head height

✅ Can have up to 2 sets of horns. Horn count for multiple sets counts all branches on 1 side of the head.
✅ Can have 6-10 Branches
✅ Can be asymmetrical - Asymmetrical horns can have up to 10 branches on each side of the head
✅ Can have soft, rounded branches or square branches
✅ Can have broken, snapped off, cropped, or missing horns. Broken horns can grow flora!

❌ Cannot grow from areas outside the top/upper sides of the head.
❌ Only 2 maximum horns can be placed on each side of the head.

✅ This trait can be applied for free to newly created designs.
If you would like to add this trait to an existing design that does not have it you can use 1 Appearance Change at the Salon.

Trait: Common satyr horns.
Size: Common horns can be anywhere from small nubs up to roughly 1.5x head height.

✅ Can be hornless
✅ Can have up to 1 set of horns
✅ Can have 1-5 Branches
✅ Can be asymmetrical - Asymmetrical horns can have up to 5 branches on each side of the head
✅ Can have soft, rounded branches or square branches
✅ Can have broken, snapped off, cropped, or missing horns.
✅ Horns can grow flora including from breaks

❌ Cannot grow from areas outside the top/upper sides of the head.
❌ Only 1 maximum horn can be placed on each side of the head.
❌ By default the horns do not have additional markings aside from optional small accent dots.

🌈 APPLIED WITH:

• Mythic Trait potion
• Prized Horn

Trait: Large, very elaborate, or many multiple horns
Size: Up to 3x head height
NOTE: Examples may be outdated!

---

✅ Check examples for maximum thickness
✅ Up to 12 branches
✅ Up to 12 TOTAL horns placed on the head
✅ Can be placed on the top, side, or back of the head
✅ Stacks with horn modifers like rosethorn, horn engravings, etc

❌ Cannot be linked "halo" horns or a disks
❌ Cannot grow over or obstruct the face or eyes
❌ Cannot replace hair, eyebrows, etc
❌ Replaces base horn style, doesn't stack with other horn styles

🌈 Can be applied with a [item not yet available].

Trait: Elaborate horns to crown an ancient's head.
Size: Can be up to 3x head height.

✅ No branch limit
✅ Can be linked together and create loops
✅ Can have filigree shaped flares
✅ Can grow slightly out of the sides of the head

❌ Cannot grow from areas outside the top/upper sides of the head.

❗ This trait is restricted to hiros/half-hiros subtype browirds only!

🌈 Can be applied using a [item here].

Trait: 
Size:

✅ 

❌ 

❗ This trait is restricted to hiros/half-hiros subtype browirds only!

🌈 Can be applied to a hiros or half hiros browbird with a Rare Trait Potion.

Trait: 
Size:

✅ 

❌ 

❗ This trait is restricted to hiros/half-hiros subtype browbirds only!

🌈 Can be applied to a hiros or half hiros browbird with an Uncommon Trait Potion.

Trait: 
Size:

✅ 

❌ 

Additional horn customization.
Adds intricate carvings to the horns. The exact look of the carvings is up to you.

🌈 Can be added with a Horn Engraving item specific to the species you are using it on. This item can be obtained via the Engraving Memories quest.
🌈 Can be added with an Uncommon Trait Potion

✅ Can be added to any horn type.
✅ Can be added alongside other additional horn traits.
✅ Can be applied to one horn or both.
✅ Can be asymmetrical in style and placement
✅ This trait does not replace other traits!

❌ Does not allow horns to have large holes carved out of them.
❌ Does not allow you to add rare markings to the horns without the corresponding traits.
❌ Carvings cannot glow without Glowing markings or Glowing Extras.
❌ Carvings cannot have inlays of materials like metal or gemstone without a corresponding trait that allows for it. Traits that can allow for inlays varies with the species.

🌈 APPLIED WITH:

• Uncommon Trait Potion - browbird

Trait: Allows the horns to be two different styles, or have one missing
Size: Only affects horns

---

✅ Can be applied to any horn type except hornless
✅ Hornless trait is not needed to remove a horn on one side
✅ Mismatched horns can be any horn style from the same or lower rarity. (Ex: if applied to rare horns you could do 1 rare horn, 1 uncommon horn)
✅ Allows the horns to be asymmetrical in placement as well

❌ Does not change base horn rarity! So if it's applied to common horns you may use 2 different common horn styles.

☑️ Common traits are free to apply to MYOs. You can swap to a common trait on an existing design using an Appearance Change.

---

Trait: A single pair of simple horns OR a single unicorn horn placed on the top of the head
Size: Max x1 head height

---

✅ Can be as thin or thick as the examples
✅ Can be very small
✅ Pointed and rounded tips are okay
✅ Can have very small nicks and divots, these are OK to apply asymmetrically!
✅ Can have scratches and various horn textures (shown below)

❌ Cannot be stacked
❌ Can only be placed on the top of the head like the examples show
❌ Cannot have multiple branches or prongs, only a very small divot in the tip at most!
❌ Cannot be engraved, broken, asymmetrical/mismatched, thorned, doubled, or have other modifiers without the appropriate trait modifiers
❌ Unicorn horn cannot be off-center
❌ Horns cannot be entirely obscured by hair regardless of size, please make sure they are showing at least a little in the masterlist art!

Common horn Examples

---

You are not limited to the horns shown!

Horn Texture

---

If applying a horn texture you must stick close to what is shown in the examples and it should be applied to both horns (without the mismatched horn trait). Scratches can be asymmetrical. Horn textures can be applied to higher rarity horns for free!

Uncommon browbird horn types. 

You can change the horns of an existing design to an uncommon style if you have an Uncommon Trait Potion. You must go through the design change salon to do so!

✅ The maximum length cannot be longer than 1.5x (one and a half times) browbird's head height
✅ Can be as thick as the thickest horns shown in the examples below

🔸 This trait allows only one set of horns placed on the top, side, or back of the head.
🔸 Uncommon horns should not have more than 3 branches
🔸 Simple Common horns can be doubled, this will make them uncommon! 

★ When creating a new design with uncommon horns or adding uncommon horns to an existing design, you are also able to add the following common horn modifiers for free:

• Drake Horn Texture
• Spiral Horn Texture
• Scratched Horns

★ If you have an additional Uncommon Trait Potion, access to an additional uncommon trait, or another item that allows for it, you may also add on the following per uncommon trait:

• Horn Engraving (Can also be gained the Horn Engraving item)

★ If you have a Rare Trait potion, access to a rare trait for your MYO, or another item that allows for it, you may also add on one of the following per rare trait/item to your common horns:

• Rosethorn (Can also be gained through Rosethorn Water)
• Broken Horns (Can also be gained through Browbird Broken Horns)
• Mismatched Horns
• Moderate Doubled Horns

Examples of Uncommon Horns

You are not limited to the horns shown.

 

 

Additional horn customization.
Adds tiny thorns to the horns.

🌈 Can be added with a Rosethorn Water
🌈 Can be added with a Rare Trait Potion

✅ Can be added to any horn type.
✅ Can be added alongside other additional horn traits.
✅ Can be applied to one horn or both.
✅ Application does not have to be symmetrical.
✅ Can be applied randomly or be used to create lines of thorns.
✅ This trait does not replace other traits!

🔸 Thorns should be kept short and small. They should not resemble branching antlers.

🌈 APPLIED WITH:

• Horn Removal - browbird
• Uncommon Trait Potion - browbird

Trait: Entirely removes all horns on the head
Size: Only affects head horns

---

✅ The browbird is entirely hornless on the head, no horns are visible!

❌ Replaces common, uncommon, rare, mythic, or subtype-specific horns. Cannot stack with any traits that are only applied to horns.
❌ Not needed to have 1 missing horn with missmatched horns. This trait is only to remove ALL horns on the head.

Rare browbird horn types. 

You can change the horns of an existing design to a rare style if you have an Rare Trait potion, You must go through the design change salon to do so!

✅ The maximum length cannot be longer than roughly 2x (twice) browbird's head height. 
✅ Can be as thick as the thickest horns shown in the examples below

🔸 This trait allows only one set of horns placed on the top, side, or back of the head unless the example shows otherwise
🔸 Rare horns should not have more than 6 branches
🔸 Horns should be symmetrical by default
🔸 Uncommon horns can be doubled, this will make them rare! 

🔸 "Tiara" Horns labeled below on the examples should not be much larger than shown. For a larger version of the trait, please see Mythic Horns!

🔸 For "No Horns" see the No Horns trait.

★ When creating a new design with rare horns or adding rare horns to an existing design, you are also able to add the following common horn modifiers for free:

• Drake Horn Texture
• Spiral Horn Texture
• Scratched Horns

★ If you have an additional Uncommon Trait Potion, access to an additional uncommon trait, or another item that allows for it, you may also add on the following per uncommon trait:

• Horn Engraving (Can also be gained the Horn Engraving item)

★ If you have a Rare Trait potion, access to a rare trait for your MYO, or another item that allows for it, you may also add on one of the following per rare trait/item to your common horns:

• Rosethorn (Can also be gained through Rosethorn Water)
• Broken Horns (Can also be gained through Browbird Broken Horns)
• Mismatched Horns
• Moderate Doubled Horns

Examples of Rare Horns

You are not limited to the horns shown.

🌈 This is an ITEM ONLY [limited] trait and cannot be obtained with a Rare trait potion, grant, trait purchases, or MYO traits. Can only be applied to a browbird using the specific trait item.

🌈 Applied to a browbird using Razor Nachos

Trait: Adds an intricate weapon-like tail tip, sharp enough to use as a weapon
Size: Only affects the tail tip. Should only affect the last 15% of the tail for commont to rare tails. Or 10% of the tail if mythic length. Can be as wide as it is long. Does not extend total tail length!

✅ Can be applied to any tail aside from tailess browbirds. The longer/larger the tail the larger the tip can be.
✅ Can be any bladed weapon shape. EX: Sword, dagger, keyblade, trident, drill, etc!
✅ Can have engravings, chips, cracks, and breaks as long as parts of it still look like a razor tip
✅ Stacks with the following tail addon traits if the design also has those traits

• Mythic Thorned tail
• Mythic reflective accents - can affect the entire razor. Keep in mind large razors may use up the entire reflective accent coverage
• Uncommon split tail, Rare x2 tail AND mythic x3+ tails - Each tail tip can have a different razor type.
• Uncommon tail holes

❌ Should not be only a flat spade (common) or flat simple shape (uncommon).
❌ Not chained or hinged. It is just the tail tip, not an object, and it does not serve other functions. Cannot be removed, move, or spin separate from the whole tail. (EX: would not move like scissor blades or circular saw but could resemble them!)
❌ Does not extend total tail size. This trait is ADDED ON to whatever the existing tail type is.
❌ Should not be stylized to heavily resemble bones