🌈 APPLIED WITH:

• Mythic Trait potion
• Prized Horn

Trait: Large, very elaborate, or many multiple horns
Size: Up to 3x head height
NOTE: Examples may be outdated!

---

✅ Can have up to 6 sets of horns, or 12 horns total on the head
✅ No branch limit
✅ Can be placed on the top, side, or back of the head
✅ Stacks with horn modifers like rosethorn, horn engravings, etc
✅ Can be asymmetrical, broken, snapped off, cropped, or missing horns. Broken horns can grow flora!
✅ Horns can connect and create large closed loops as long as it does not look like holes!
✅ Can be affected by any horn modifiers

❌ Cannot be disk-like horns
❌ Cannot grow over or obstruct the face or eyes
❌ Cannot replace hair, eyebrows, etc
❌ Replaces base horn style, doesn't stack with other horn styles

🌈 Can be applied to a browbird, painted satyr, or kitbull using a Mythic Trait Potion
🌈 Can be applied to a browbird, painted satyr, or kitbull using a Runic Scope

Trait: Adds runic circles, runic patterns, or a single rune to the eyes of a browbird or painted satyr.
Size: Only affects the eyes.

✅ Can replace the iris, pupil, or fill the entire eye
✅ Runes can optionally glow/partially glow. If the glow can turn on/off please provide references of both variants.
✅ Runes can be fictional symbols or real life words/symbols. If submitting a design using real life words please provide a translation when submitting if they are non-english words. Any text that breaks community guidelines is not permitted.

❌ Both eyes must be symmetrical unless the design also has mismatched eyes
❌ Rune cannot be invisible when not glowing

Runes are not something someone can be born with, instead they are applied at some point in the person's life. Infusing permanent magic to the eyes is always a risky endevor and is just as difficult as finding someone or something that is capable of performing the task. 

These runes are often applied to aid in enchancing natural sight beyond what is normally capable, or placing spells within the eyes that can trigger when the user focuses their vision on a target or makes direct eye contact with something.

🌈 Can be applied to a browbird using a Mythic Trait Potion

Trait: Adds accents or small markings that are reflective to a single browbird
Size: Small area and accents only. Can cover up to 15% of the design maximum. 

✅ Application can be asymmetrical
✅ Can be applied to rare and mythic markings to make them reflective if the design has the corresponding traits
✅ Can be any color. You can use a variety of colors on a single design and do not have to stick to just one.

❌ The entirety of the allowed coverage cannot be condensed into one chunk (such as a hand, horn, or hair) or otherwise used to give the illusion of part made entirely of metal. Ex: horns should only have partial coverage/markings, not be entirely covered in gold.
❌ ONLY MARKINGS, claws, teeth, carving inlays, and a few scales can be reflective. No part can appear 100% made out of metal.
❌ Cannot be applied to eyes, crest, or the tongue/flesh/blood/scars.
❌ Regardless of colors it should be obviously shiny/reflective with a very drastic dark-light-white shine/gradient like the examples. This is to make it distinct from normal gradients!
❌ This trait can only be applied once. You cannot apply it multiple times to increase coverage.

This example shows max allowed coverage.

🌈 This is an ITEM ONLY [limited] trait and cannot be obtained with a Mythic trait potion, grant, trait purchases, or MYO traits. Can only be applied to a painted satyr using a Stripeless Candycane.

🌈 APPLIED WITH:

• Stripeless Candycane

Trait: Patch areas without any stripes!
Size: Must affect at least one patch area.

✅ Can affect all patch areas or just specific ones
✅ It can be used with textured patches allowed by specific mask materials to create solid areas of that material only if that material has patch modifying features that can affect the entire patch (ex: wood texture patches for wood mask, metal texture patches for metal mask)
✅ Any non-stripe marking is allowed. Rare markings will still require their respective traits!

❌ Does not automatically grant other patch traits or increase patch coverage, this feature is applied separately!
❌ Can't make patches entirely out of ice, crystal, or other elements as those materials do not affect the entire patch!

🌈 This is an ITEM ONLY [limited] trait and cannot be obtained with a Mythic trait potion, grant, trait purchases, or MYO traits. Can only be applied to a painted satyr using a Shattered Shot.

🌈 APPLIED WITH:

• Shattered Shot

Trait: Applies a break in part of the mask to expose the soul underneath
Size: Can affect up to 30% of the mask. Blight can flow up to 1.5x head height away from the mask hole.

---

✅ An elemental or magical effect can seep from the break, this can be anything as long as it corresponds to an ASPECT or a TRAIT the character has. So for example a blight made of floating stars could be pulled from star markings, the arcane aspect, or a stag's mark! Eyes within the blight could be perception, nightmare, eye markings, extra eyes, or any eye trait!
✅ Some effects are a "general appearance" which can be used regardless of aspect! Things like fire, wispy effects, floating liquid, or glow are fine to incorporate regardless of design!
✅ You can combine effects
✅ Blight can be any color and optionally glow, be translucent, and have sparkles
✅ Blight can have particles that float close to and within the blight effect
✅ Blight can contain any plant types present in the satyrs flora, or ANY plants if paired with wood aspect
✅ Blight can lightly affect a small amount of hair where the blight effect is located
✅ Can be paired with cracked mask and would allow the cracks to seep small amounts of elements as well!
✅ Can contain shattered parts of the mask floating within it

❌ The blight effect cannot resemble any of the following to not overlap with other traits:

• Living creatures
• Exposed skull bone
• Weapon impalement or physical real weapons
• Extra solid limbs
• Crystal or ice growing ON the mask
• Detailed physical objects, plushies, solid coins, etc cannot be part of the blight or floating within it. The exceptions are things like crystals, plants, etc that clearly appear elemental!
• Missing eyes (lost eyes are not a trait)
• Elemental eyes
• Extra ears, extra horns (ie: unicorn horn), or feathers

❌ Blight does not make other parts of the head, horns, eyes, mouth, ears, etc elemental.
❌ Blight is not a hole in the head and would not show what's inside the head. It is a hole through soul, so it is similar to peering into "another dimension". All effects should clearly appear to be coming from inside the mask, not growing atop of it or causing the mask to appear to be made of a different material.
❌ Cannot remove the entire mouth
❌ Cannot only be cracks or only be small holes, must have a large or continous main break

NOTE: FIRST IMAGE IS OUTDATED, EXAMPLES WILL BE UPDATED SOON!

The aspects and traits listed here are possible individual options for getting that blight effect! "General Appearance" means anyone design can use it!

🌈 Can be added to a browbird with a Browbird Broken Horns
🌈 Can be added to a kitbull with Kitbull Broken Horns
🌈 Can be added to a browbird or kitbull with a Rare Trait Potion

✅ Can be added to any horn type.
✅ Can be applied to one horn or both.
✅ Application does not have to be symmetrical.
✅ This trait does not replace other traits!

❌ Does not allow horns to have large holes carved out of them.
❌ Does not change base horn rarity or change horns to uncommon or rare
❌ Does not add horns to a character
❌ Does not allow you to completely remove a horn
❌ Cannot glow without mythic Glowing Markings
❌ If you decide to draw your character with a "horn cap" or "horn replacement" to cover the break, please keep in mind that it must not appear as if their horn itself is made of a different material. 

Additional horn customization.
Adds tiny thorns to the horns.

🌈 Can be added with a Rosethorn Water
🌈 Can be added with a Rare Trait Potion

✅ Can be added to any horn type.
✅ Can be added alongside other additional horn traits.
✅ Can be applied to one horn or both.
✅ Application does not have to be symmetrical.
✅ Can be applied randomly or be used to create lines of thorns.
✅ This trait does not replace other traits!

🔸 Thorns should be kept short and small. They should not resemble branching antlers.

Rare browbird horn types. 

You can change the horns of an existing design to a rare style if you have an Rare Trait potion, You must go through the design change salon to do so!

✅ The maximum length cannot be longer than roughly 2x (twice) browbird's head height. 
✅ Can be as thick as the thickest horns shown in the examples below

🔸 This trait allows only one set of horns placed on the top, side, or back of the head unless the example shows otherwise
🔸 Rare horns should not have more than 6 branches
🔸 Horns should be symmetrical by default
🔸 Uncommon horns can be doubled, this will make them rare! 

🔸 "Tiara" Horns labeled below on the examples should not be much larger than shown. For a larger version of the trait, please see Mythic Horns!

🔸 For "No Horns" see the No Horns trait.

★ When creating a new design with rare horns or adding rare horns to an existing design, you are also able to add the following common horn modifiers for free:

• Drake Horn Texture
• Spiral Horn Texture
• Scratched Horns

★ If you have an additional Uncommon Trait Potion, access to an additional uncommon trait, or another item that allows for it, you may also add on the following per uncommon trait:

• Horn Engraving (Can also be gained the Horn Engraving item)

★ If you have a Rare Trait potion, access to a rare trait for your MYO, or another item that allows for it, you may also add on one of the following per rare trait/item to your common horns:

• Rosethorn (Can also be gained through Rosethorn Water)
• Broken Horns (Can also be gained through Browbird Broken Horns)
• Mismatched Horns
• Moderate Doubled Horns

Examples of Rare Horns

You are not limited to the horns shown.

❗ This trait is restricted to hiros/half-hiros subtype browirds only!

🌈 Can be applied to a hiros or half hiros browbird with a Rare Trait Potion.

Trait: 
Size:

✅ 

❌ 

🌈 APPLIED WITH:

• Rare Trait Potion (Browbird)
• Double Pretzel (Browbird)

Trait: Adds a second tail beside or below the current one
Size: Second tail max size is dependant on tail rarity

---

✅ Second tail can be ANY STYLE/LENGTH of the same or lower rarity to the current tail.
✅ You can swap/edit the existing tail when appling this trait without a change ticket
✅ Tails can be coiled together
✅ Can stack with other tail modifiers like split tail, spade tip, etc.

❌ Cannot stack with 3+ Tails
❌ Only adds an extra tail, does not change tail rarity
❌ If your tail idea doesn't look like 2 distinct tails you may not need this trait

🌈 This is an ITEM ONLY [limited] trait and cannot be obtained with a Rare trait potion, grant, trait purchases, or MYO traits. Can only be applied to a browbird using the specific trait item.

🌈 Applied to a browbird using Razor Nachos

Trait: Adds an intricate weapon-like tail tip, sharp enough to use as a weapon
Size: Only affects the tail tip. Should only affect the last 15% of the tail for commont to rare tails. Or 10% of the tail if mythic length. Can be as wide as it is long. Does not extend total tail length!

✅ Can be applied to any tail aside from tailess browbirds. The longer/larger the tail the larger the tip can be.
✅ Can be any bladed weapon shape. EX: Sword, dagger, keyblade, trident, drill, etc!
✅ Can have engravings, chips, cracks, and breaks as long as parts of it still look like a razor tip
✅ Stacks with the following tail addon traits if the design also has those traits

• Mythic Thorned tail
• Mythic reflective accents - can affect the entire razor. Keep in mind large razors may use up the entire reflective accent coverage
• Uncommon split tail, Rare x2 tail AND mythic x3+ tails - Each tail tip can have a different razor type.
• Uncommon tail holes

❌ Should not be only a flat spade (common) or flat simple shape (uncommon).
❌ Not chained or hinged. It is just the tail tip, not an object, and it does not serve other functions. Cannot be removed, move, or spin separate from the whole tail. (EX: would not move like scissor blades or circular saw but could resemble them!)
❌ Does not extend total tail size. This trait is ADDED ON to whatever the existing tail type is.
❌ Should not be stylized to heavily resemble bones

🌈 APPLIED WITH:

• Rare Trait Potion
• Astrean - subtype FREE TRAIT

Trait: Super long tail
Size: Over 1x body length up to 1.5x body length.

---

✅ Can be any single furred or hair-like tail style
✅ Can be thick/chunky/super fluffy
✅ Can be prehensile
✅ Can have a spaded or shaped tip that's flat or more rounded in any of the styles shown below.

SHAPED TAIL TIP STYLES

‼️ Please read over the main crest info first! Applying any of these effects will make your crest RARE.

★ Huge Crest

---

Trait: Allows the crest to be over 1x head height to a max of 1.5x head height

✅ Sizing is always proportional to your character and how they are drawn/stylized.

❌ CANNOT GO PAST 1.5x head height this includes ALL effects, multiple crests, and particles. 

★ The larger the crest, the more magical energy a browbird has to draw from allowing them to perform bigger feats of magic, but it takes them far longer to recover if they're utterly drained. There are also bigger risks that come with overdrawing.

★ DARK AND PRISMATIC

---

Trait: Rare crest color possibilities! Unlimited hues and a wider range for dark colors.

✅ Prismatic lets you have any amount of different colors on the crest applied to any part of the crest, effects, and particles
✅ Prismatic effect ALSO allows the crest to optionally change to any color (within crest rarity) whether it be at will or for a specific IC reason. This can optionally be included on the masterlist but does not have to be.
✅ Dark crests allow any amount of DARK saturated colors placed anywhere on the crest, effects, and particles
✅ You can mix where the colors are placed and how much coverage there is!

❌ DARK CRESTS cannot be duller than common crests, ONLY darker. The examples show the darkest possible colors!
❌ KEEP IN MIND some gradients may make muddy colors that turn gray, try to stay within range even on gradients!

★ Dark crests give off less light, hinting at some kind of run in with the Abyss.
★ Prismatic crests on the other hand are flashy. A multicolored soul often means you will find more success when branching out into new aspects.

★ Shattered

---

Trait: Breaks the crest apart

✅ Can be broken into any amount of fragments but fragments must be floating VERY CLOSE TOGETHER and maintain the shape of the original crest
✅ Can have cracks, be broken fragments, or both
✅ 1-5 tiny shards can float slightly further from the crest (check the star example below)
✅ Breaks can be jagged or clean
✅ Can be applied to effects

❌ Cannot be made to look like multiple crest shapes at all, it must be pieces of a singular crest only

★ It is a scar left behind by trauma. What could alter someone's view of the world so drastically that it breaks apart their soul?

★ Starlit

---

Trait: Fills the crest with tons of sparkles, stars, and constellations. The stars contained within move separately from the crest, like you are gazing through a hole into another world.

✅ Can be applied to the shape or any effects

❌ Must be contained within the crest

★ Those with close ties to the astral oceans have souls filled with stars. No matter where they are, the crest reflects the sky in a place that was important to them.

★ Scribble

---

Trait: Changes the crest to have a rough, scratchy, or scribbly drawing look.

✅ Can be applied to any shape and effects
✅ Can affect the whole crest or just the outlines/patterns

❌ Must still retain the crest shape and be clear which crest shape it is regardless of roughness

★ A sign of instability, whether it be in your body, magic, or mind. The soul is struggling to hold itself together, one day it may unravel.

★ Brilliance

---

Trait: Adds glowing streaks of light around the edges of the crest

✅ Can fully or partially surround the crest or an effect
✅ Can overlap with the crest
✅ Sizes of the individual brilliance lights can be uneven sizes but should still at least vaguely form a circle or half circle

❌ Cannot extend past the crest sizing limit, if your crest is already max size for its rarity you will have to size it down to fit the brilliance
❌ Can only be applied ONCE per crest shape
❌ Cannot be used to make the crest resemble a clock

★ Someone who has been so loved that the shine of their soul reflects it.

★ Outline

---

Trait: Turns a crest into just an outline of its shape.

✅ Can be applied to any crest shape, effect, or both

❌ All parts of the outline must be entirely connected, there cannot be stray floating shapes (unless shattered)
❌ Must be SIMPLE and follow the shape of the crest only, new crest shapes cannot be added within the outline. It should not resemble crests of a higher rarity!

★ Something important is missing, or was it taken? Those with only an outline crest have experienced a loss so devestating that it took part of their soul with it.