Additional horn customization.
Allows the horns to be different types.

🌈 Can be added with a Rare Trait Potion

✅ Can be added to any horn type.
✅ Can be added alongside other additional horn traits.

✅ Horns must be asymmetrical with this trait. 
+ You can make each horn an entirely different horn type of the same or lower rarity
+ You can make each horn a different size
+ You can apply different additional horn traits to each horn given that they are available to you.

✅ This trait does not replace other traits!

❌ Does not allow one horn to be completely removed without the rare No Horns trait
❌ This trait is NOT required to have horns with different colors or patterns.

Additional horn customization.
Adds tiny thorns to the horns.

🌈 Can be added with a Rosethorn Water
🌈 Can be added with a Rare Trait Potion

✅ Can be added to any horn type.
✅ Can be added alongside other additional horn traits.
✅ Can be applied to one horn or both.
✅ Application does not have to be symmetrical.
✅ Can be applied randomly or be used to create lines of thorns.
✅ This trait does not replace other traits!

🔸 Thorns should be kept short and small. They should not resemble branching antlers.

☑️ Common traits are free to apply to MYOs. You can swap to a common trait on an existing design using an Appearance Change.

---

Trait: A single pair of simple horns OR a single unicorn horn placed on the top of the head
Size: Max x1 head height

---

✅ Can be as thin or thick as the examples
✅ Can be very small
✅ Pointed and rounded tips are okay
✅ Can have very small nicks and divots, these are OK to apply asymmetrically!
✅ Can have scratches and various horn textures (shown below)

❌ Cannot be stacked
❌ Can only be placed on the top of the head like the examples show
❌ Cannot have multiple branches or prongs, only a very small divot in the tip at most!
❌ Cannot be engraved, broken, asymmetrical/mismatched, thorned, doubled, or have other modifiers without the appropriate trait modifiers
❌ Unicorn horn cannot be off-center
❌ Horns cannot be entirely obscured by hair regardless of size, please make sure they are showing at least a little in the masterlist art!

Common horn Examples

---

You are not limited to the horns shown!

Horn Texture

---

If applying a horn texture you must stick close to what is shown in the examples and it should be applied to both horns (without the mismatched horn trait). Scratches can be asymmetrical. Horn textures can be applied to higher rarity horns for free!

Uncommon browbird horn types. 

You can change the horns of an existing design to an uncommon style if you have an Uncommon Trait Potion. You must go through the design change salon to do so!

✅ The maximum length cannot be longer than 1.5x (one and a half times) browbird's head height
✅ Can be as thick as the thickest horns shown in the examples below

🔸 This trait allows only one set of horns placed on the top, side, or back of the head.
🔸 Uncommon horns should not have more than 3 branches
🔸 Simple Common horns can be doubled, this will make them uncommon! 

★ When creating a new design with uncommon horns or adding uncommon horns to an existing design, you are also able to add the following common horn modifiers for free:

• Drake Horn Texture
• Spiral Horn Texture
• Scratched Horns

★ If you have an additional Uncommon Trait Potion, access to an additional uncommon trait, or another item that allows for it, you may also add on the following per uncommon trait:

• Horn Engraving (Can also be gained the Horn Engraving item)

★ If you have a Rare Trait potion, access to a rare trait for your MYO, or another item that allows for it, you may also add on one of the following per rare trait/item to your common horns:

• Rosethorn (Can also be gained through Rosethorn Water)
• Broken Horns (Can also be gained through Browbird Broken Horns)
• Mismatched Horns
• Moderate Doubled Horns

Examples of Uncommon Horns

You are not limited to the horns shown.

 

 

Completely removes all horns from the browbird, allowing them to be hornless.

Applying this trait will remove the horns and all horn modifiers and additional horn traits. 

🌈 Can be added with a Rare Trait Potion

🔸 This trait can stack with Mismatched Horns to completely remove horns from one side of the browbird's head while still keeping horns on the other side to create an asymmetrical look.

❌ No Horns by itself cannot stack with any additional horn traits or horn customization.

Rare browbird horn types. 

You can change the horns of an existing design to a rare style if you have an Rare Trait potion, You must go through the design change salon to do so!

✅ The maximum length cannot be longer than roughly 2x (twice) browbird's head height. 
✅ Can be as thick as the thickest horns shown in the examples below

🔸 This trait allows only one set of horns placed on the top, side, or back of the head unless the example shows otherwise
🔸 Rare horns should not have more than 6 branches
🔸 Horns should be symmetrical by default
🔸 Uncommon horns can be doubled, this will make them rare! 

🔸 "Tiara" Horns labeled below on the examples should not be much larger than shown. For a larger version of the trait, please see Mythic Horns!

🔸 For "No Horns" see the No Horns trait.

★ When creating a new design with rare horns or adding rare horns to an existing design, you are also able to add the following common horn modifiers for free:

• Drake Horn Texture
• Spiral Horn Texture
• Scratched Horns

★ If you have an additional Uncommon Trait Potion, access to an additional uncommon trait, or another item that allows for it, you may also add on the following per uncommon trait:

• Horn Engraving (Can also be gained the Horn Engraving item)

★ If you have a Rare Trait potion, access to a rare trait for your MYO, or another item that allows for it, you may also add on one of the following per rare trait/item to your common horns:

• Rosethorn (Can also be gained through Rosethorn Water)
• Broken Horns (Can also be gained through Browbird Broken Horns)
• Mismatched Horns
• Moderate Doubled Horns

Examples of Rare Horns

You are not limited to the horns shown.

🌈 APPLIED WITH:

• Mythic Trait potion
• Prized Horn

Trait: Large, very elaborate, or many multiple horns
Size: Up to 3x head height
NOTE: Examples may be outdated!

---

✅ Check examples for maximum thickness
✅ Up to 12 branches
✅ Up to 12 TOTAL horns placed on the head
✅ Can be placed on the top, side, or back of the head
✅ Stacks with horn modifers like rosethorn, horn engravings, etc

❌ Cannot be linked "halo" horns or a disks
❌ Cannot grow over or obstruct the face or eyes
❌ Cannot replace hair, eyebrows, etc
❌ Replaces base horn style, doesn't stack with other horn styles

❗ This trait is restricted to hiros/half-hiros subtype browbirds only!

🌈 Can be applied to a hiros or half hiros browbird with an Uncommon Trait Potion.

Trait: 
Size:

✅ 

❌ 

❗ This trait is restricted to hiros/half-hiros subtype browirds only!

🌈 Can be applied to a hiros or half hiros browbird with a Rare Trait Potion.

Trait: 
Size:

✅ 

❌ 

❗ This trait is restricted to hiros/half-hiros subtype browirds only!

🌈 Can be applied using a [item here].

Trait: 
Size:

✅ 

❌ 

🌈 Can be applied with a [item not yet available].

Trait: Elaborate horns to crown an ancient's head.
Size: Can be up to 3x head height.

✅ No branch limit
✅ Can be linked together and create loops
✅ Can have filigree shaped flares
✅ Can grow slightly out of the sides of the head

❌ Cannot grow from areas outside the top/upper sides of the head.

❗ TRAIT IS A WIP and may be adjusted in the future! Designs submitted with this trait have a higher chance of being turned down due to lack of reference material.

🌈 Applied to a revenant browbird with a Death Dagger

Trait: Horns that resemble bones
Size: Up to 3x head height total, including curves.

✅ Horns can resemble any type of bone such as spines, skeletons, etc
✅ Can be linked together
✅ Up to x5 horns on the head max can be placed with this trait
✅ Can stack with other horn modifying traits eg: rosethorn, horn engraving, mismatched, broken
✅ Horns can have any of these optional addons:

• Torn deer-like horn velvet that hangs off the horns
• Fleshy tendon/connective tissue - bone must still show through so it cannot cover whole horn but can be lightly layered over the horns
• Large cracks or chunks/breaks taken out of the horns

❌ This trait REPLACES the existing horn style unless you're using mismatched horns to have one standard and one bone horn.

This trait is a WIP! While it is available for use, please be aware that designs submitted are more likely to be rejected if they use this trait due to lack of up to date reference material.

🌈 Can be applied to a halv browbird using a Hemlock Spawn

Trait: Allows the horns to overtake the face and cover the eyes
Size: At minimum must cover at least one eye. Can cover up to 75% of the face/head area, mouth must still be able to open.

---

🌀 Can be applied to:  Common Horns Uncommon Horns Wing Horns Rare Horns Large Wing Horns Mythic Horns Halo Horns Royal Horns Skeletal Horns Mutant Horns

🌀 Can be modified by: ➕Default Horn Texture ⚡Horn Engraving ⚡Mismatched Horns (free) ⚡Rosethorn (Free) ⚡Broken Horns ⚡Reflective Accents ⚡Glowing Markings ⚡Extra Sense ⚡Shattered ➕ Glowing Extras (Free)

---

✅ Can be asymmetrical and mismatched
✅ Horns can grow from any part of the mask including where the eyes would be
✅ Can have small thorns
✅ Can cover one eye or both
✅ Can cover the top of the head, the sides, just the front, and can trail down to the jaw and chin area
✅ Can have small armor-like slits for the eyes but the eyes should not be completely visible

🔸 If you use this trait it will not require you to design a mask for your halv!

❌ Does not change the horn rarity, it only modifies how the horns grow.
❌ Mask horns should be one entire connected piece and not divided into seperate non-connected parts
❌ If the mask horns cover the nose the nose stripe must still be visible in some form on the mask
❌ IC the mask horns cannot be removed, they are part of the character's face and they would not be able to see out of a covered eye
❌ The mouth cannot be covered, they should still be able to move and open their mouth
❌ To apply mutant horns to mask horns it will require the use of 2 halv traits total

This trait is a WIP! While it is available for use, please be aware that designs submitted are more likely to be rejected if they use this trait due to lack of up to date reference material.

Horns that grow from the face and head in bizarre ways. Multiple horn sets, branches, and more are possible. They can be rounded or thorny and can grow from the eyes and sides of the face.

🌈 Can be applied using an Uncommon Trait Potion.

Trait: 
Size:

✅ 

❌ 

Adds an extra matching set of common horns onto the browbird to a maximum of two horn sets total on the head. This trait cannot be used more than once on a single design.

Can only be applied to common horns. This turns the horns into an uncommon "double" variant of the common horns,