Traits

➕ Common Effect (Common)

Category: Crest
Species: Browbird

Common crest effects.

✅ Existing Designs: Common effects can be added to any browbird's crest at the design change salon through the use of an Appearence Change ticket.
✅ MYO Designing: When designing a new character, you are able to use these effects for free.
✅ Limitations: You are not limited on how many different effects you can use, however each effect can only be applied one time per crest shape/effect. 

common-crest-effects_1.png

Dual toned crests are made up of two separate color groups, such as blue and orange like the example. They can be twisted, gradiented, or otherwised mixed together however you'd like! Browbirds who posses a dual toned crest are more likely to have an easier time learning their second magical aspect in their early adulthood!

🔸 The crest has up to two distinct colors present on it.
Turnways crests are simply the crest turned upside down! Those with the turnways crest likely had a more difficult time learning their second aspect when it first began to appear. They are said to be the sorts who get lost easily, and are often people who think outside the box.

🔸 Flips the entire crest or part of the crest upside down.

Fires Crest (Common)

Category: Crest
Species: Browbird

Choose one of the following shapes. Once chosen, you cannot change the shape.

Picture

Polygon Crest (Common)

Category: Crest
Species: Browbird

Choose one of the following shapes. Once chosen, you cannot change the shape.

Picture

Polyhedra Crest (Common)

Category: Crest
Species: Browbird

Choose one of the following shapes. Once chosen, you cannot change the shape.

Picture

Sky Crest (Common)

Category: Crest
Species: Browbird

Choose one of the following shapes. Once chosen, you cannot change the shape.

Picture

Space Crest (Common)

Category: Crest
Species: Browbird

Choose one of the following shapes. Once chosen you cannot change the shape.

Picture

Misc Common Crest (Common)

Category: Crest
Species: Browbird

Choose one of the following shapes. Once chosen, you cannot change the shape.

These shapes may switch to another crest subcategory later! 

Picture

➕ Particle Effect (Common)

Category: Crest
Species: Browbird

Crest Particle Effects

Crest particles are a small, optional trait and can be added to the crest.

These particles are made entirely of magic and would not be something you could "move" or "pick up". The effects will usually sit on or float around with the crest and follow its flow. If one were to fall too far away from the crest, it would fade away.

✅ Existing Designs: Particle effects can be added to any browbird's crest at the design change salon through the use of an Appearence Change ticket if they meet the criteria.
✅ MYO Designing: When designing a new character, you are able to use these effects for free if your design meets the criteria.
✅ Limitations:
☑️ Crest particles can be added so long as your character meets the corresponding aspect criteria. For example, browbirds with the Wood aspect may add the leaf and petal effects, but cannot have the rune effects if they do not have the Arcane aspect.
☑️ Certain particles can be added for free regardless of aspects!
☑️ Colors do not need to match the examples.
☑️ You are not limited to how many different particle effect types you can use, such as both butterflies AND eyes. However, the clusters are not additive, and cannot crowd a crest with every type of particle. They remain just as spaced out and sparse as they would with a single type. 
☑️ Crest particles must remain small and simplistic in shape, and should flow with or around the crest.

❌ Should not interact or intersect with other traits.
❌ Should not be used to resemble traits a character doesn't have (ex: using runes to resemble mythic crests, or being so spaced out they look like the wisp trait). They should not resemble a second crest.
❌ Placement should be at least somewhat random-looking and not form obvious lines or clear shapes, such as circles.
❌ The number of particles cannot be very low, such as one or two of a particle. It must be a good few.
❌ Particles must follow the color crest guidlines (i.e. you cannot have mythic colored particles, such as black, unless your crest is mythic, etc)



Simple/Small Horns

Simple/Small Horns (Common)

Category: Horns
Species: Browbird

Common browbird horn types. 

These are the default horns available to all browbirds and can be used on any browbird design. 

✅ Any of these horns can be switched to on any browbird at the design change salon through the use of an Appearence Change ticket.
✅ The maximum length cannot be longer than the browbird's head height
✅ Can be as thick as the thickest horns shown in the examples below

🔸 This trait allows only one set of horns placed on the top of the head.
🔸 Common horns should not have multiple branches or prongs but they can have very small divets at the tips
🔸 Common horns should remain as simple, smooth shapes with minimal hard edges or abrupt curves.

When creating a new design with common horns or adding common horns to an existing design, you are also able to add the following horn modifiers for free:

If you have an Uncommon Trait Potion, access to an uncommon trait, or another item that allows for it, you may also add on one of the following per uncommon trait:

If you have a Rare Trait potion, access to a rare trait for your MYO, or another item that allows for it, you may also add on one of the following per rare trait to your common horns:


Examples of Common Horns

You are not limited to the horns shown.

common-horns-1_orig.png

Picture

Picture
Picture

Picture

Common Tail

Common Tail (Common)

Category: Tail
Species: Browbird

This trait can be applied for free to any browbird MYO slot.
☑️ If your existing browbird design does not have this trait it can be added with an Appearance Change at the Salon.


Trait: A single short tail.
Size: Can be anywhere from a tiny nub to knee-length at default. Certain specific styles can be slightly longer than knee length, see examples below.

✅ You are not limited to the examples shown and can use any type of tail as long as it fits into the general idea portrated by the trait. 
✅ Common Tails can optionally have a single, simple spaded tip!

❌ Fluff amount/tail thickness should not be more than the tails shown shown in examples.
❌ This trait cannot be applied multiple times for multiple tails.
❌ Tail fur cannot be used to increase length passed the max length.

Picture


Regular Common Tail Examples

Common Tails 1 by Browbird
Common Tails 2 by Browbird
Common Tails 3 by Browbird
Commojn Tails 4 by Browbird


Common Length Exceptions

These specific tail types can be longer than knee length and instead can lightly touch the ground. If you want a common tail of this length you must use one of these options or something very similar to these!

Common Tails 5 by Browbird


Tail Spade Examples

Spade-tails Orig by Browbird

Flare

Flare (Common)

Species: Browbird

Adds flare feathers to the browbird's forehead.

This flare can take on any shape and can have a variety of details.

The flare should remain close to the size shown.

Flare1 by Browbird

Short Head Feathers

Short Head Feathers (Common)

Species: Browbird

Adds feathers to the sides or back of the browbird's head.

Up to 6 of these feathers can be present at one time.

The feathers should not be more than 1.5x the height of the browbird's head.

The feathers can be as thick or thin as the examples shown.

Feathers can have all sorts of colors and patterns.

Face Feathers1 by BrowbirdFace Feathers2 by Browbird

Moth Feathers1 by BrowbirdSleek Feathers1 by Browbird

➕ Spur

➕ Spur (Common)

Species: Browbird

This trait can be applied for free to any browbird MYO slot.
☑️ If your existing browbird design does not have this trait it can be added with an Appearance Change at the Salon.

Trait: Adds a single small spike to the back of the browbirds lower leg/food
Size: Cannot be larger than the examples shown.

✅ Application can be on one foot or both.
✅ Application can be asymmetrical
✅ Can be sharp or rounded
✅ Can be curved or straight.

❌ Cannot be larger than the maximum size shown below
❌ Can only be applied to the areas shown

 

13 results found.