❗ This trait is restricted to hiros/half-hiros subtype browirds only!

🌈 Can be applied using a [item here].

Trait: 
Size:

✅ 

❌ 

🌈 Can be applied with a [item not yet available].

Trait: Feyblood Satyr Horns. They're mainly unicorn or crown styled horns.
Size: Can be up to 3x head height.

✅ Can have 1+ horns at the center of the head and top of the head.
✅  Can have a crown of horns that partially or fully encircle the head with a unicorn horn at the center
✅ No branch limit!
✅ Can be asymmetrical - Asymmetrical horns can have up to 20 branches on each side of the head
✅ Can have soft, rounded branches or square branches
✅ Can have broken, snapped off, cropped, or missing horns. Broken horns can grow flora!
✅ Horns can connect and create closed loops

❌ Cannot grow from areas outside the top/upper sides of the head.

🌈 Can be applied with a Mythic Trait Potion

Trait: Mythic satyr horns.
Size: Mythic horns can be up to 3x head height

✅ Can have up to 5 sets of horns.
✅ No branch limit!
✅ Can be asymmetrical.
✅ Can have soft, rounded branches or square branches
✅ Can have broken, snapped off, cropped, or missing horns. Broken horns can grow flora!
✅ Horns can connect and create closed loops

❌ Cannot grow from areas outside the top/upper sides of the head.
❌ Only 5 maximum horns can be placed on each side of the head.

🌈 Can be applied to a painted satyr with a Rare Trait Potion

Trait: Rare satyr horns.
Size: Rare horns can be up to roughly 2x head height

✅ Can have up to 3 sets of horns. Horn count for multiple sets counts all branches on 1 side of the head.
✅ Can have 11+ Branches
✅ Can be asymmetrical
✅ Can have soft, rounded branches or square branches
✅ Can have broken, snapped off, cropped, or missing horns. Broken horns can grow flora!

❌ Cannot grow from areas outside the top/upper sides of the head.
❌ Only 3 maximum horns can be placed on each side of the head.

Note: Small mistake on 11 branch example, one branch isn't showing and will be edited to show the proper count!

🌈 Can be applied to a painted satyr with an Uncommon Trait Potion.

Trait: Uncommon satyr horns.
Size: Uncommon horns can be up to 1.5x head height

✅ Can have up to 2 sets of horns. Horn count for multiple sets counts all branches on 1 side of the head.
✅ Can have 6-10 Branches
✅ Can be asymmetrical - Asymmetrical horns can have up to 10 branches on each side of the head
✅ Can have soft, rounded branches or square branches
✅ Can have broken, snapped off, cropped, or missing horns. Broken horns can grow flora!

❌ Cannot grow from areas outside the top/upper sides of the head.
❌ Only 2 maximum horns can be placed on each side of the head.

✅ This trait can be applied for free to newly created designs.
If you would like to add this trait to an existing design that does not have it you can use 1 Appearance Change at the Salon.

Trait: Common satyr horns.
Size: Common horns can be anywhere from small nubs up to roughly 1.5x head height.

✅ Can be hornless
✅ Can have up to 1 set of horns
✅ Can have 1-5 Branches
✅ Can be asymmetrical - Asymmetrical horns can have up to 5 branches on each side of the head
✅ Can have soft, rounded branches or square branches
✅ Can have broken, snapped off, cropped, or missing horns. Broken horns can grow flora!

❌ Cannot grow from areas outside the top/upper sides of the head.
❌ Only 1 maximum horn can be placed on each side of the head.

🌈 Can be applied using an Uncommon Trait Potion.

Trait: 
Size:

✅ 

❌ 

Adds an extra matching set of common horns onto the browbird to a maximum of two horn sets total on the head. This trait cannot be used more than once on a single design.

Can only be applied to common horns. This turns the horns into an uncommon "double" variant of the common horns,

This trait is a WIP! While it is available for use, please be aware that designs submitted are more likely to be rejected if they use this trait due to lack of up to date reference material.

Horns that grow from the face and head in bizarre ways. Multiple horn sets, branches, and more are possible. They can be rounded or thorny and can grow from the eyes and sides of the face.

This trait is a WIP! While it is available for use, please be aware that designs submitted are more likely to be rejected if they use this trait due to lack of up to date reference material.

🌈 Can be applied to a halv browbird using a Hemlock Spawn

Trait: Allows the horns to overtake the face and cover the eyes
Size: At minimum must cover at least one eye. Can cover up to 75% of the face/head area, mouth must still be able to open.

---

🌀 Can be applied to:  Common Horns Uncommon Horns Wing Horns Rare Horns Large Wing Horns Mythic Horns Halo Horns Royal Horns Skeletal Horns Mutant Horns

🌀 Can be modified by: ➕Default Horn Texture ⚡Horn Engraving ⚡Mismatched Horns (free) ⚡Rosethorn (Free) ⚡Broken Horns ⚡Reflective Accents ⚡Glowing Markings ⚡Extra Sense ⚡Shattered ➕ Glowing Extras (Free)

---

✅ Can be asymmetrical and mismatched
✅ Horns can grow from any part of the mask including where the eyes would be
✅ Can have small thorns
✅ Can cover one eye or both
✅ Can cover the top of the head, the sides, just the front, and can trail down to the jaw and chin area
✅ Can have small armor-like slits for the eyes but the eyes should not be completely visible

🔸 If you use this trait it will not require you to design a mask for your halv!

❌ Does not change the horn rarity, it only modifies how the horns grow.
❌ Mask horns should be one entire connected piece and not divided into seperate non-connected parts
❌ If the mask horns cover the nose the nose stripe must still be visible in some form on the mask
❌ IC the mask horns cannot be removed, they are part of the character's face and they would not be able to see out of a covered eye
❌ The mouth cannot be covered, they should still be able to move and open their mouth
❌ To apply mutant horns to mask horns it will require the use of 2 halv traits total

Horns that resemble bones such as spines or ribcages. 

🌈 Can be applied with a [item not yet available].

Trait: Elaborate horns to crown an ancient's head.
Size: Can be up to 3x head height.

✅ No branch limit
✅ Can be linked together and create loops
✅ Can have filigree shaped flares
✅ Can grow slightly out of the sides of the head

❌ Cannot grow from areas outside the top/upper sides of the head.

Additional horn customization.
Adds intricate carvings to the horns. The exact look of the carvings is up to you.

🌈 Can be added with a Horn Engraving item specific to the species you are using it on. This item can be obtained via the Engraving Memories quest.
🌈 Can be added with an Uncommon Trait Potion

✅ Can be added to any horn type.
✅ Can be added alongside other additional horn traits.
✅ Can be applied to one horn or both.
✅ Can be asymmetrical in style and placement
✅ This trait does not replace other traits!

❌ Does not allow horns to have large holes carved out of them.
❌ Does not allow you to add rare markings to the horns without the corresponding traits.
❌ Carvings cannot glow without Glowing markings or Glowing Extras.
❌ Carvings cannot have inlays of materials like metal or gemstone without a corresponding trait that allows for it. Traits that can allow for inlays varies with the species.

❗ This trait is restricted to hiros/half-hiros subtype browirds only!

🌈 Can be applied to a hiros or half hiros browbird with a Rare Trait Potion.

Trait: 
Size:

✅ 

❌ 

❗ This trait is restricted to hiros/half-hiros subtype browbirds only!

🌈 Can be applied to a hiros or half hiros browbird with an Uncommon Trait Potion.

Trait: 
Size:

✅ 

❌ 

Mythic browbird horn types. 

You can change the horns of an existing design to a mythic style if you have a  Mythic Trait Potion. You must go through the design change salon to do so!

✅ The maximum length cannot be longer than roughly 3x  browbird's head height. 
✅ Can be as thick as the thickest horns shown in the examples below

🔸 Mythic horns can have up to 12 branches
🔸 Up to 12 horns can be placed on the head using this trait.
🔸 Mythic horns can be linked but they should not link at the center or forehead area or create "halos". For halo horns see Halo Horns. For central linked horns see Royal Horns.
🔸 Mythic horns can be placed anywhere on the top, side, or back of the head.

★ When creating a new design with mythic horns or adding rare horns to an existing design, you are also able to add the following common horn modifiers for free:

• Drake Horn Texture
• Spiral Horn Texture
• Scratched Horns

★ If you have an additional Uncommon Trait Potion, access to an additional uncommon trait, or another item that allows for it, you may also add on the following per uncommon trait:

• Horn Engraving (Can also be gained the Horn Engraving item)

★ If you have a Rare Trait potion, access to a rare trait for your MYO, or another item that allows for it, you may also add on one of the following per rare trait/item to your common horns:

• Rosethorn (Can also be gained through Rosethorn Water)
• Broken Horns (Can also be gained through Browbird Broken Horns)
• Mismatched Horns

Examples of Mythic Horns

You are not limited to the horns shown.

 

Rare browbird horn types. 

You can change the horns of an existing design to a rare style if you have an Rare Trait potion, You must go through the design change salon to do so!

✅ The maximum length cannot be longer than roughly 2x (twice) browbird's head height. 
✅ Can be as thick as the thickest horns shown in the examples below

🔸 This trait allows only one set of horns placed on the top, side, or back of the head unless the example shows otherwise
🔸 Rare horns should not have more than 6 branches
🔸 Horns should be symmetrical by default
🔸 Uncommon horns can be doubled, this will make them rare! 

🔸 "Tiara" Horns labeled below on the examples should not be much larger than shown. For a larger version of the trait, please see Mythic Horns!

🔸 For "No Horns" see the No Horns trait.

★ When creating a new design with rare horns or adding rare horns to an existing design, you are also able to add the following common horn modifiers for free:

• Drake Horn Texture
• Spiral Horn Texture
• Scratched Horns

★ If you have an additional Uncommon Trait Potion, access to an additional uncommon trait, or another item that allows for it, you may also add on the following per uncommon trait:

• Horn Engraving (Can also be gained the Horn Engraving item)

★ If you have a Rare Trait potion, access to a rare trait for your MYO, or another item that allows for it, you may also add on one of the following per rare trait/item to your common horns:

• Rosethorn (Can also be gained through Rosethorn Water)
• Broken Horns (Can also be gained through Browbird Broken Horns)
• Mismatched Horns
• Moderate Doubled Horns

Examples of Rare Horns

You are not limited to the horns shown.

 

 

 

 

 

Completely removes all horns from the browbird, allowing them to be hornless.

Applying this trait will remove the horns and all horn modifiers and additional horn traits. 

🌈 Can be added with a Rare Trait Potion

🔸 This trait can stack with Mismatched Horns to completely remove horns from one side of the browbird's head while still keeping horns on the other side to create an asymmetrical look.

❌ No Horns by itself cannot stack with any additional horn traits or horn customization.

Uncommon browbird horn types. 

You can change the horns of an existing design to an uncommon style if you have an Uncommon Trait Potion. You must go through the design change salon to do so!

✅ The maximum length cannot be longer than 1.5x (one and a half times) browbird's head height
✅ Can be as thick as the thickest horns shown in the examples below

🔸 This trait allows only one set of horns placed on the top, side, or back of the head.
🔸 Uncommon horns should not have more than 3 branches
🔸 Simple Common horns can be doubled, this will make them uncommon! 

★ When creating a new design with uncommon horns or adding uncommon horns to an existing design, you are also able to add the following common horn modifiers for free:

• Drake Horn Texture
• Spiral Horn Texture
• Scratched Horns

★ If you have an additional Uncommon Trait Potion, access to an additional uncommon trait, or another item that allows for it, you may also add on the following per uncommon trait:

• Horn Engraving (Can also be gained the Horn Engraving item)

★ If you have a Rare Trait potion, access to a rare trait for your MYO, or another item that allows for it, you may also add on one of the following per rare trait/item to your common horns:

• Rosethorn (Can also be gained through Rosethorn Water)
• Broken Horns (Can also be gained through Browbird Broken Horns)
• Mismatched Horns
• Moderate Doubled Horns

Examples of Uncommon Horns

You are not limited to the horns shown.

 

 

☑️ Common traits are free to apply to MYOs. You can swap to a common trait on an existing design using an Appearance Change.

---

Trait: A single pair of simple horns OR a single unicorn horn placed on the top of the head
Size: Max x1 head height

---

✅ Can be as thin or thick as the examples
✅ Can be very small
✅ Pointed and rounded tips are okay
✅ Can have very small nicks and divots, these are OK to apply asymmetrically!
✅ Can have scratches and various horn textures (shown below)

❌ Cannot be stacked
❌ Can only be placed on the top of the head like the examples show
❌ Cannot have multiple branches or prongs, only a very small divot in the tip at most!
❌ Cannot be engraved, broken, asymmetrical/mismatched, thorned, doubled, or have other modifiers without the appropriate trait modifiers
❌ Unicorn horn cannot be off-center
❌ Horns cannot be entirely obscured by hair regardless of size, please make sure they are showing at least a little in the masterlist art!

Common horn Examples

---

You are not limited to the horns shown!

Horn Texture

---

If applying a horn texture you must stick close to what is shown in the examples and it should be applied to both horns (without the mismatched horn trait). Scratches can be asymmetrical. Horn textures can be applied to higher rarity horns for free!